Quick Search:    advanced search

GSW Home   GeoRef Home   My GSW Alerts   Contact GSW   About GSW   Journals List   Help

This Article Figures Only Full Text Full Text (PDF) Alert me when this article is cited Alert me if a correction is posted Services Email this article to a friend Similar articles in this journal Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via HighWire Citing Articles via ISI Web of Science (1) Citing Articles via Google Scholar Google Scholar Articles by Nishihara, Y. Articles by Karato, S.-I. Search for Related Content GeoRef GeoRef Citation

Effects of metal protection coils on thermocouple EMF in multi-anvil high-pressure experiments

¹ Department of Geology and Geophysics, Yale University, New Haven, Connecticut 06520, U.S.A.
² Department of Environmental Sciences, Ibaraki University, Bunkyo, Mito, Ibaraki 310-0056, Japan

Correspondence: ^* Corresponding author present address: Department of Earth and Planetary Sciences, Tokyo Institute of Technology, Meguro-ku, Tokyo 152-8551, Japan. E-mail: yuu{at}geo.titech.ac.jp

Metallic coils (in most cases Cu coils) are often used in high-pressure experiments to protect thermocouple wires. In this paper we show that these coils have important influences on thermocouple EMF and therefore on the temperature measurements. We tested this effect by measuring EMF from Cu coiled single wires of chromel and alumel, and, further, we conducted experiments to compare the EMF from W5Re-W26Re thermocouples with and without Cu coils attached to them. The results show systematic differences in thermocouple readings; the EMFs from W-Re thermocouples with Cu coils give systematically lower values than EMFs from thermocouples without Cu coils. The results were analyzed using a simple model. The difference in thermocouple EMFs between thermocouples with and without protection coils is given by

where E_i and R_i are the EMF and the electrical resistance of metal i in the portion of the Cu coil, and the subscripts 1+, 1–, and 2 indicate positive thermocouple metal, negative thermocouple metal, and coil metal, respectively. The addition of a coil with different metal has a large effect — the E_TC will be close to –(E₁₊ – E_1–) < 0 when the resistance of the coil is significantly smaller than that of a thermocouple wire. For a Cu coil and W-Re thermocouple, R₁₊, _1– >> R₂ and therefore thermocouple readings with a Cu coil will lead to underestimation of the real temperature. Under common experimental conditions with a multi-anvil apparatus, the error in the temperature estimate caused by Cu protection coils is ~100–150 K for a peak temperature of 1600–2000 K.

Key Words: High-pressure and high-temperature studies • thermocouple EMF • electrical properties • tungsten-rhenium alloy • chromel-alumel

This article has been cited by other articles:

				Y. Nishihara, T. Shinmei, and S.-i. Karato Effect of chemical environment on the hydrogen-related defect chemistry in wadsleyite American Mineralogist, May 1, 2008; 93(5-6): 831 - 843. [Abstract] [Full Text] [PDF]